DML 1/72 scale Armor Pro Series Kit No.
7324: M2A3 Bradley
Media and Contents:
191parts (159 in grey styrene,
22 in DS tan plastic, 10 etched brass)
retail price estimated at US $13.98
State-of-the-art kit of the most current
model of the Bradley fielded
Some parts simplified, e.g. tools molded in
place, one or two bad seams may be hard to align
Highly Recommended for small-scale modern
The US, like the Russians and Israelis today, is having to come to
grips with the fact that they no longer really need open-country
heavy combat vehicles as much as "street fighters" to deal with
terrorists and other urban fighters. The latest model of the Bradley
IFV, the A3, now adds to the vehicle's capability to deal with these
Like the M1A2 Abrams before it, the A3 Bradley now adds a
Commander's Independent Thermal Viewer (CITV) mounted on an armored
pedestal behind the commander's hatch. It also adds the complete
explosive reactive armor array which was designed for use even with
the first versions of the A2 variant more than 17 years ago. GPS and
IFF antennas are also present. There are other internal changes, but
the bottom line is that all of this means the Bradley is now pushing
30 short tons weight from the wrong side.
Following on the heels of the DML M3A2 variant of the Bradley CFV
(No. 7333) this kit includes nearly all of the parts from that kit
less the commander's bullet-proof glass "cage" and adds even more
parts to it. In point of fact, DML's 1/72 scale kits are now quite
similar to their 1/35 scale brethren – once you take all of the
sprues out of the box you will never get them all back in!
The kit is nearly identical to the M3A2 but now adds two more sprues
with the A3 parts and some detail changes to the hull. In this
scale, it does provide a great deal of options: all wheels roll, the
rear ramp operates, and the gun can be made to move up or down. The
latter comes at a price, as it requires using the aerial gunsight
connector arm and other sight arm (parts E2 and E4) made out of DS
plastic now, so one end may have to be left loose.
The hatches and missile launcher box are poseable but not moveable.
Also this version comes with thermal ID panels and etched brass
mounts for some of the ERA assemblies. These are the bases (meaning
if desired the boxes may be left off). Note that you may have to
sand or scrape off some of the surface detail to get a good fit with
the styrene ERA assemblies on the hull sides and glacis.
As the A3 is now the vehicle of choice, the kit offers four
finishing options: Charlie Company, 2-7 Cav, 1st Cavalry Division,
North of Baghdad 2004 (C-13); 2-8 Infantry, 2nd Brigade 4th Infantry
Division, Fort Irwin, California 2001(ID panel number 4160); 2-7 Cav,
1st Cavalry Division, Iraq 2004 (black 73); and Unidentified Unit,
Iraq 2005 (ID panel A21, rear number 11). All are in overall sand
with few tactical markings. A small sheet of targeted Cartograf
decals is provided.
In summary, this kit nearly completes the full range of Bradleys in
US service since the mid 1980s.
A 3 Bradley hull and turret top
B 40 Bradley wheels
C 50 Bradley turret and A2 rear hull parts
C 29 Bradley hull and A1 rear hull parts
E 22 DS Plastic track runs and wheel keepers
F 10 Bradley applique armor fit
G 7 Bradley ERA fit
H 20 Bradley M2A3 parts
MA 10 etched brass